Fix Unable to Set Default Printer Error 0x00000709 – Have you suffered from Default Printer Error 0x00000709?
The error states the operation issues and more specifically this initiates the poor working conditions of the printer. With “Fix Unable to Set Default Printer Error 0x00000709“, the noticeable message which is displayed on the screen is “Operation could not be completed. Double check the printer name and make sure that the printer is connected to the network”.
This usually happens due to the occurrence of new updates and when the window is unable to process the installation of the printer. Thoughts might occur why such issues happen and how to Fix Unable to Set Default Printer Error 0x00000709.
Overview of Error 0x00000709: Operation Could Not Be Completed”
Here is an overview of the Default Printer Error 0x00000709. The happenings of errors are commonly noticed when the users perform the steps by which they can change the printer’s default settings. The printer may try to adapt the setting but on the same note, Windows fails to do so. The occurrence causes hurdles in the function hence the need for the Fix Unable to Set Default Printer Error 0x00000709 is necessary. What could be more signification than doing the deed on your own?
For the purpose of resolving the error, the important part is to first find the printer’s name and change it in the Registry Editor followed by the changes in the RPC connection settings policy. Most commonly the users, if following these steps to Fix Unable to Set Default Printer Error 0x00000709 properly, get the results as the printer starts in the working conditions as before. But in case it may not help, you are then required to follow the alternative methods. These methods are described below by the team of Tech Support Experts.
Fix Unable to Set Default Printer Error 0x00000709
We have mentioned the steps to resolve and Fix Unable to Set Default Printer Error 0x00000709 below. It is necessary to follow these steps carefully and try not to initiate any other setting in your knowledge. if you still face the cure of errors or the message appears as “Operation could not be completed. Double check the printer name and make sure that the printer is connected to the network” Kindly contact our helpline number.
Check the Stimuli Printer’s Involvement
In some cases, while you choose to change the default setting for the printer Default Printer, Error 0x00000709 may occur. For this purpose, it then is essential that you may look for the interference of any other printer. See whether the ant other printer is connected to the computer device or not. If the connection is noticed, remove the cable of all the printers except the one you want to clear the fault.
If you still face errors and face difficulty in the Fix Unable to Set Default Printer Error 0x00000709 without the involvement of any other printer, follow the other steps we have mentioned in the blog below.
Edit the Printer’s Name in the Registry Editor
Here are the steps mentioned which are necessary to follow to Fix Unable to Set Default Printer Error 0x00000709 and change the name of the printed in the registry.
- Search “Registry Editor” and right-click on it.
- Click on Run as administrator.
- You will reach the Registry Editor address bar, paste “Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows”
- Click on Devices followed by Modify.
- You will reach the Value data field.
- Click OK.
Following these steps require the restart of the computer after the completion of these steps.
Clear the Faults in the RPC Connections
Once you are done with the above steps, it is now important to check for the RPC connection setting to Fix Unable to Set Default Printer Error 0x00000709. The steps for the same are mentioned below.
- Search “Group Policy”.
- Go to Edit group policy and Click.
- Select Administrative Templates > Printers in the left sidebar.
- Double Click on Configure RPC connection settings.
- Check the Enabled policy settings.
- Find RPC over-named pipes from the drop-down menu.
- The above steps have to be followed by Protocol to use for outgoing RPC connections.
- Click OK and Restart.
Troubleshoot the Printer
If any of the above-mentioned steps for Fix Unable to Set Default Printer Error 0x00000709 doesn’t work, it is your time to troubleshoot the printer.
- Go to the Start button and select Settings.
- Click on the System tap available in the left sidebar.
- Click Troubleshoot which you can find in the right pane.
- Click Other troubleshooters.
- Tap on the Printer troubleshooter.
- Press the Run button.
Next, you will be instructed on the screen for the further steps, let the printer troubleshoot, and then restart again.
Contact Tech Support Expert Today.
If you still face trouble in Fix Unable to Set Default Printer Error 0x00000709, contact us today.